Home › Interior Remodeling › Culver City
Culver City interior contractor
From a 1970s townhome to a Spanish-style house in Carlson Park, we update Culver City interiors from the ceiling down: smooth drywall, paint, floors, doors, closets and fireplaces. Los Angeles Home Remodelers is a design-build interior remodeling contractor in Culver City, CA.
One project manager tests old ceiling texture, books the trades in order and files any building or electrical permit through the Culver City Permit Portal. Most single-room jobs wrap up in a few days to a couple of weeks, and a whole unit or floor runs longer. You’ll get a free in-home visit and a written, itemized estimate.
Bonded & Insured | Written Workmanship Warranty
Condo, townhome or house, we look at ceilings, walls, closets and floors. Free, no obligation.
Thanks — we got your request. We'll call you to set up your free in-home visit.
Interior remodeling in Culver City
Serving Carlson Park, Veterans Park, Sunkist Park, Fox Hills and homes across Culver City, CA.
Interior remodeling in Culver City tends to start overhead and at the walls, then works down to closets, doors and floors. That order keeps every new finish clean, and it suits the two kinds of homes we see most here.
The first is a condo or townhome from 1965 onward, including the big complexes built on the old MGM backlot in the 1970s. Those units tend to share sprayed ceilings, mirrored closets and hollow doors.
The second is a traditional or Spanish-style house, where plaster walls, arched openings and oak floors deserve a careful match rather than a tear-out.
Services
These six services cover most Culver City interiors we’re asked to update. Each links to its own page, and they run on one schedule.
Many 1970s condos still carry a sprayed, textured ceiling and walls patched by several owners.
We test that ceiling texture before scraping, then skim it smooth or hang new drywall. In Spanish-style houses, we match hand-troweled plaster and rebuild the curve of an arched opening.
Flooring installation in Culver City ranges from a townhome’s stairs and landing to a bungalow’s whole main floor.
In a condo, we check the HOA’s flooring rules before you choose. In a house, we look at the subfloor first, so squeaks and soft spots get fixed under the new boards.
Hollow-core doors and flimsy bifolds are standard in condos and townhomes from the 1960s and 1970s.
We replace them with solid-core doors, pocket doors where swing space is tight and French doors to a home office. Each door gets new hinges and hardware to match.
Floor-to-ceiling mirrored sliders were the closet of choice in 1970s units, and the space behind them is usually one rod and a shelf.
We rebuild the inside with drawers, double rods and shoe shelves, and replace the sliders with doors that open the whole closet.
Interior painting in Culver City follows the ceiling and wall repairs, so the finish coat covers a surface that’s already smooth.
We pick sheens by room, paint ceilings flat to hide the old texture lines and prep any pre-1978 surface with lead-safe containment.
Spanish-style living rooms often center on a plaster fireplace with a tiled hearth, while condo fireplaces lean toward dated brick or stacked stone.
We refinish the surround, swap in white tile or smooth plaster and add a gas insert under permit where the firebox allows.
How it works
Four steps, with lab results and any permit settled before the dust starts.
Tell us whether it’s a condo, townhome or house and which rooms you want redone. Photos of the ceilings and closets help.
We scrape a small sample of any textured ceiling for the lab, measure every opening and note each switch or outlet the plan moves.
Your written estimate lists each room in working order, plus any building or electrical permit we’ll file on the city portal.
Ceiling and drywall work go first, then paint, then closets, doors and floors, so nothing new gets dripped on or scraped.
Culver City spells out which work needs which permit. A remodel or alteration takes a building permit, and any new, replacement or relocated wiring device takes an electrical permit, so moving a switch during a wall repair counts. Paint and new floor coverings rarely need one, and we confirm your scope with the city.
We file through the Culver City Permit Portal and meet each inspector. If your house is a designated Landmark or Significant structure, exterior changes get Cultural Affairs review; the program doesn’t state an interior exemption, so we check your address before work starts.
Condos and townhomes
Units from the 1960s and 1970s were finished fast and alike: sprayed ceilings, hollow doors and mirrored closets. Updating them is mostly a matter of order, testing and your HOA’s rules.
In a unit from that era, we plan for:
If the ceiling sample comes back positive, a licensed abatement crew removes it before we skim and paint. A clean result means we scrape, skim and prime the same week.
Either way, you see the lab report and the schedule change in writing.
Interior remodeling cost
Ceiling and wall prep usually costs more than the finish that goes over it.
Testing, scraping and skim coating take labor that a paint-only quote leaves out. You’ll see each step priced on its own line.
A lab test, scraping and skim coating add days; abatement adds a licensed crew.
Old patches, plaster arches and texture matching take more hand work than flat drywall.
Moving switches or outlets adds an electrician, a permit and an inspection.
Solid-core doors and built-in closet interiors cost more than hollow doors and wire shelves.
Townhome stairs need nosing and careful cuts, so they cost more per foot than open rooms.
A free walkthrough covers sampling, the permit question and room-by-room pricing. There’s no commitment.
Questions
Ceilings, permits, condos and Spanish-style houses, in short answers.
Most jobs here cover ceilings and drywall, paint, closets, doors and floors, sometimes with a fireplace update. You can book one service or several, and one project manager runs them in order.
It could be; sprayed ceilings from that era sometimes contained it, and you can’t tell by eye. We send a sample to a lab first, and a licensed crew handles removal if it tests positive.
Yes. The city requires an electrical permit for new, replacement or relocated wiring devices. We file it through the Culver City Permit Portal along with any building permit the job needs.
Usually, with HOA approval. Many associations set rules on flooring and underlayment for sound, so we read yours before you choose and send the board the product details.
Yes. We repair plaster with plaster where it’s sound, hand-trowel new sections to blend in and rebuild arched openings on a curved form before paint.
Most single rooms take a few days to a couple of weeks. A whole unit with ceiling removal, closets and new floors runs longer, and a lab result or abatement can add days.
Related services
The full service: every interior trade planned and run in the right order.
Condo-friendly plank, hardwood, tile and stair work, compared side by side.
Smooth ceilings, clean trim and the right sheen for every room.
From the blog
Now booking free in-home visits
A tested ceiling, solid doors and rebuilt closets make an older Culver City unit feel new again. We plan, permit and finish it under one contract. Request your free in-home visit.
Mon–Sat, 8am–6pm
We sample the ceiling, measure the closets and doors and price the work room by room. Free.
Thanks — we got your request. We'll call you to set up your free in-home visit.
