Home › Exterior Remodeling › Culver City
Culver City exterior remodeling contractor
Spanish-style and traditional houses fill many Culver City, CA streets, and their exteriors need matched stucco, windows with the right proportions, sound roofs, front and sliding doors, siding repairs and fresh paint. Los Angeles Home Remodelers is the design-build exterior remodeling contractor in Culver City that plans those trades as one project.
One project manager files each permit through the Culver City Permit Portal, building and electrical as your scope requires, and checks whether your house is a listed historic structure. Most single-trade jobs take days to a few weeks. Book a free in-home visit for a written, itemized estimate.
Bonded & Insured | Written Workmanship Warranty
Tell us about your house and its style. We’ll check permits and historic status and price each trade, free.
Thanks — we got your request. We'll call you to set up your free in-home visit.
Culver City exterior remodeling
Serving Carlson Park, Sunkist Park, Veterans Park and homes across Culver City, CA.
Exterior remodeling in Culver City usually means renewing a Spanish-style or traditional house while keeping the look that drew you to it. That calls for stucco patched to the original texture, windows that hold their proportions and a roof that suits the style.
The city’s older architecture runs from Mission and Colonial Revival to 1930s PWA Moderne. From 1965 into the mid-1970s, condo complexes followed, several of them on the former MGM backlot.
We handle the permits trade by trade and run every crew under one contract. You get one project manager and your dates in writing.
Our exterior trades
Each trade below keeps your house’s style in view. Choose one or line up several on a single schedule.
Stucco repair in Culver City starts with the texture. Smooth or lightly troweled walls give a Spanish-style house its look, so we sample the finish on a hidden wall, then patch cracks and window openings to match.
Our stucco page covers full re-stucco too.
An arched or paneled front door anchors the facade of a Revival-style house. We restore a sound original or hang a new solid-wood door over a sill pan, with hardware that suits the period.
If the job adds or moves a switch by the door, we pull the electrical permit.
Window replacement in Culver City has to respect the facade: steel-look casements on a Spanish house, divided-lite double-hungs on a Colonial Revival. We keep the opening sizes and the grid and upgrade the glass to dual-pane Low-E.
Our window page compares installs.
Natural terracotta clay tile tops many Spanish-style houses here, while traditional homes carry shingles. We reset sound tile over new underlayment, replace broken pieces and tear shingle roofs down to the deck.
Cool-roof rules get checked before you order.
Condos at Raintree, Tara Hill and Lakeside Village often still have their first aluminum patio sliders. We swap them for dual-pane units over a new sill pan, after your association signs off if it controls exterior doors.
Our slider page lists the options.
Spanish-style homes usually wear soft whites and warm earth tones, and traditional houses often add a contrasting trim color. We patch, prime and then paint with masonry or elastomeric coatings.
On pre-1978 houses, prep stays lead-safe from the first scrape.
How it works
You’ll know which permits and approvals apply before anything gets ordered.
We check your home’s historic tier, and whether a condo association has a say, before the visit.
We map stucco cracks, sample the texture, work every window and door and look at the roof from the attic.
Your estimate lists each trade with the building or electrical permit it needs from the city’s portal.
The roof and openings go first. Stucco patches cure before the final coat, and the last inspection closes the job.
Culver City’s Building Safety Division issues permits by trade through the Culver City Permit Portal. A remodel or alteration needs a building permit, and new, replacement or relocated wiring devices need an electrical one, so a single exterior job can carry two permits.
The Historic Preservation Program sorts properties into Landmark, Significant and Recognized tiers. Exterior changes to a Landmark or Significant structure need Cultural Affairs staff comment and may need a Certificate of Appropriateness; Recognized structures are honorary, with no design review.
Spanish and traditional homes
The details that make these houses read as Spanish or Colonial are small, and off-the-shelf replacement parts tend to erase them. We protect those details first.
What we keep or match:
Retrofit windows with wide frames can make a deep opening look shallow. Where the reveal matters, we specify slimmer frames or a full-frame install.
Before any finish coat, you see a sample patch in daylight. Once you approve the match, we paint.
Exterior remodeling cost
On these houses, how closely the new work must match the old sets your price more than any other factor.
We price after the visit, each trade on its own line, with permits and any historic paperwork included.
Hand-matched smooth stucco takes more time than a standard sand finish.
Steel-look or true divided-lite frames cost more than plain sliders.
Resetting clay tile over new underlayment takes more labor than re-shingling.
A second trade permit or a Certificate of Appropriateness adds fees and time.
Rot behind trim or cracked sheathing under stucco gets priced once it’s exposed.
We’ll check your address, sample your stucco and tell you what each trade needs from the city. The visit’s free.
Questions
Permits by trade, historic tiers, condo approvals and matching old finishes.
It depends on the trades you choose and how closely the work must match the original. Hand-matched stucco, period-style windows and clay tile cost more than standard finishes. A written, itemized estimate follows your free visit.
Sometimes more than one. The city permits by trade, so an alteration takes a building permit and any new or moved wiring device takes an electrical one. We file each through the Culver City Permit Portal.
Often, with a step first. Exterior changes to Landmark or Significant structures need Cultural Affairs staff comment and may need a Certificate of Appropriateness. Recognized structures carry no design review.
It can if its rules control exterior doors and windows, and many set frame colors and styles. We read the rules with you and prepare the submittal before ordering.
Yes. We sample the texture on a hidden wall and adjust until it blends, then patch cracks and window openings. You approve the sample before we finish the wall.
Yes, California’s energy code applies to replacement windows here too. We order dual-pane units rated to meet it and leave their labels on until the inspection.
Most single-trade jobs take days to a few weeks on site. A full exterior with clay tile, windows and stucco runs longer, because patches cure before paint and custom window orders set the start date.
Keep reading
Every exterior trade, the envelope and how the work gets sequenced.
Frames, grids and glass, plus permits and Title 24 for new windows.
Texture matching, crack repair and when a wall needs a full re-stucco.
From the blog
Now booking free in-home visits
Matched stucco, faithful windows and a sound roof keep a Culver City house looking like itself. We handle the permits and the trades on one contract. Book your free in-home visit.
Mon–Sat, 8am–6pm
We check permits, historic status and condition, then send an itemized estimate. No charge.
Thanks — we got your request. We'll call you to set up your free in-home visit.
