Home › Bathroom Remodeling › Bathtub Replacement
Tub Replacement & Bathtub Installation in LA
Bathtub replacement takes out a chipped, stained or leaking tub and puts in a new one that fits your bathroom and the way you bathe. Los Angeles Home Remodelers is a design-build bathroom remodeling contractor serving homes across Los Angeles, CA. We handle tub replacement and bathtub installation for alcove, drop-in and freestanding tubs in acrylic, cast iron or enameled steel.
One crew removes the old tub, repairs the subfloor, connects the new drain and overflow, and finishes the tub surround, with an LADBS permit when the plumbing moves. Most jobs take 2–5 days. Your free in-home visit ends with a written, itemized estimate.
Bonded & Insured | Written Workmanship Warranty
We measure the tub, check the floor around it and price the job line by line. No charge, no obligation.
Thanks — we got your request. We'll call you to set up your free in-home visit.
Bathtub replacement in LA
Serving homes across Los Angeles, CA.
We handle bathtub replacement in Los Angeles when the old tub leaks at the drain, shows chipped enamel or won’t come clean anymore. You get a new tub set level on a sound floor, plumbed and sealed by one licensed crew.
Older LA bathrooms make the swap harder than it looks. Craftsman and Spanish Revival baths often hold a cast-iron tub boxed in by thick mortar-set tile, and 1950s tract-house hall baths hide subfloor rot where water got past the caulk for decades.
We check the floor, the drain and the route out of the house before demo. You’ll know if the old tub leaves whole or in pieces, and if the new one clears your door and hallway.
Bathtub replacement services
Pick the scope that matches what’s wrong. Every option includes removal, haul-away and a leak test before we close the wall.
A same-spot swap puts a new standard 60-inch alcove tub where the old one sat. We cut back the bottom row of tile, lift the old tub out and set the new one level on a dry, solid subfloor.
Every tub gets a new overflow drain and waste assembly, because a worn gasket there causes most leaks at the drain.
This covers the whole tub-shower combo: the tub, the walls around it and the valve that runs it. Pick a white tile surround over a waterproofing membrane, or a one-piece surround with no grout to scrub.
While the wall’s open, we replace the mixing valve, tub spout and diverter. A new tub under an old valve is half a job.
A freestanding tub stands clear of the walls, so the drain and a floor-mounted tub filler usually move. On a raised wood floor we reroute from below; on a slab we usually cut the concrete.
We check that the floor framing can carry a filled cast-iron or stone tub. Moving a drain or supply line needs an LADBS permit, and we file it.
How it works
Four steps take you from a worn-out tub to a new one. You approve the tub, surround and price before anything’s ordered.
We measure the alcove, find the drain and check every door and turn on the way in, so the new tub fits the first time.
You choose the tub type, material and surround with us. Then you get a written estimate with every line priced on its own.
We cover the floors and take the old tub out, cast iron usually in pieces. Rot in the subfloor or framing gets fixed before the new tub goes in.
We level the tub, connect the drain, overflow and spout, then fill it and check for leaks before the surround and caulk go on.
Replace or refinish
Replace the tub when the problem sits under or behind it. Refinish or line it when the tub is sound and only the surface looks tired.
Bathtub refinishing, also called reglazing, sprays a new coating over the old finish. A liner covers the tub with a molded acrylic shell. Choose full replacement if you see any of these:
Refinishing costs less and takes about a day, but the coating wears faster than factory enamel on a tub you use daily. A liner hides the old tub, and whatever’s failing under it, behind a new shell.
If your tub’s sound and the floor’s dry, we’ll tell you at the visit, even when that means a smaller job.
Tub types
Choose the tub type by the room first, then the look. An alcove tub fits most LA hall baths; a freestanding tub needs open floor around it.
The standard 60-inch tub with walls on three sides and an apron in front. It’s the right pick when you shower in the tub too.
A tub with a rim that drops into a deck we frame and tile. Drop-ins suit larger primary baths and give you a ledge for soap and towels.
Like a drop-in, but the deck laps over the rim, so there’s no edge to clean around. The framing and waterproofing take more work, and it costs more.
A deep tub that stands in the room, often in acrylic or stone resin. It fits mid-century and modern baths with space to clean around it.
A cast-iron or acrylic tub on feet, the period look for Craftsman and Spanish Revival bathrooms. With no wall behind it, it takes a tub-mounted or floor-mounted filler.
Tub materials
The material decides the tub’s weight, how long the water stays warm and how the finish holds up.
Material
Best for
Watch out for
Install notes
Acrylic
Most replacements and soaking tubs
Scratches under abrasive cleaners
Light; bedded in mortar so it feels solid
Fiberglass
Rentals and tight budgets
Flexes, dulls and cracks sooner than acrylic
Lightest; fits through narrow doors
Enameled steel
Hall baths that need a hard finish
Chips if something heavy drops; cools fast
Sound-deadening pad underneath
Cast iron
Long soaks and period bathrooms
Very heavy, so the floor framing gets checked
Goes in whole; the old one leaves in pieces
Stone resin
Freestanding soaking tubs
Heavy, and costs more than acrylic
Floor check first; a full crew carries it in
White subway or large-format porcelain over cement board and a waterproofing membrane. It looks built in and lasts as long as the layer behind it.
Molded acrylic or fiberglass wall panels with no grout lines. Multi-piece kits go in where a one-piece won’t fit through the door.
The drain, overflow and trip lever that tie the tub into the drain line, finished in chrome, nickel, brass or black to match your spout.
The mixing valve sets the water temperature, and the diverter sends water from the tub spout to the showerhead. New valves are pressure-balancing or thermostatic, which current California code calls for in a tub-shower.
One visit gets you the tub size, a floor check and a written estimate. It’s free, and you don’t sign anything.
Questions
Straight answers on cost, timing, permits, refinishing and fit.
Your bathtub replacement cost comes down to the tub, the surround and what’s under the old one. A same-spot acrylic swap costs least. A cast-iron removal with new tile and a moved drain costs most. The written, itemized estimate after your free visit is the real number.
A same-spot tub swap takes 1–2 days. With a new tile surround, plan on 4–7 days, because thinset and grout need time to cure. You can’t use that tub or shower in between, so plan around a second bathroom.
A like-for-like swap may not need one, while moving the drain or supply lines does. We check your scope with LADBS, tell you which applies at the visit, then file the permit and meet the inspector.
Refinish if the tub’s sound and only the finish is worn: chipped enamel, stains or an old color. Replace it if it leaks, cracks, rusts through or sits on a soft floor. The replace-or-refinish section above lists the signs.
Not entirely. The tub’s flange sits behind the bottom row of tile, so we cut back that row and re-tile the strip. Old tile rarely matches, so many homeowners replace the surround at the same time.
Usually, and we check before you order. A standard 60-inch acrylic tub turns through most hallways, but narrow Spanish Revival doorways and tight condo halls can stop a one-piece tub. If it won’t fit, we pick a model that does.
Sometimes. A freestanding tub needs open floor on each side so you can clean around it, and the drain usually moves. In a 5-by-8 hall bath, a deep alcove soaking tub gives you the soak without the floor space.
We break it up under a cover in the bathroom and carry it out in pieces, since most cast-iron tubs are too heavy to move whole. Haul-away is a line on your estimate, and the metal gets recycled.
Yes. We replace bathtubs in homes across Los Angeles, CA. Send the form or call, and we’ll set up your free visit.
More bathroom services
The full bathroom: layout, plumbing, waterproofing, tile and permits under one contract.
Swap the tub for a walk-in shower in the same alcove, with a low or zero entry.
A watertight door and a built-in seat, for bathing without stepping over a tub wall.
From the blog
Now booking free in-home visits
A new tub on a sound floor ends the leaks and the scrubbing. Los Angeles Home Remodelers measures, removes, installs and permits it under one contract. Book your free in-home visit today.
Mon–Sat, 8am–6pm
We measure the tub, check the floor around it and price the job line by line. No charge, no obligation.
Thanks — we got your request. We'll call you to set up your free in-home visit.