Home › Kitchen Remodeling › Kitchen Islands
Islands sized for real clearance, with seating, storage, power, or a prep sink. Designed, built, and installed under one contract.
CSLB Lic. [#000000] | Bonded & Insured | Written Workmanship Warranty
We measure the room, mark clearances, and scope the island. No charge, no obligation.
Form fields: Full name, Email, Phone, Project address, Scope (Kitchen island, Cabinet refacing, New or custom cabinets, Countertop installation, Full kitchen remodel, Not sure yet), Preferred date, Tell us about your kitchen. Submit button: Book My Free Visit (red #E12228).
We measure your kitchen and tell you if an island fits, or if a peninsula works better. Book a slot.
Outlets, a sink, or a cooktop planned with the permit, not after. See how it works.
Serving: Los Angeles, the Valley, Pasadena, Burbank, Mar Vista, and the South Bay.
Kitchen island design and installation in Los Angeles starts with a tape measure, not a style board. An island needs clear walkways on every working side, and many LA kitchens are narrower than the photos you’ve saved.
We measure first and tell you straight whether an island fits. If it doesn’t, a peninsula or a narrower island gets you the seating and prep space without blocking the dishwasher.
Then we build it: base cabinets, top, outlets, and any sink or cooktop. In slab-foundation homes across the Valley, adding a sink means trenching the floor, so we plan plumbing before design is final.
Certified Service
CSLB Lic. [#000000]
An island usually brings matching cabinets and a new top. Each page explains what the work involves and how it fits the island schedule.
Not sure where to start?
[YOUR PHONE]
The full remodel: layout, cabinets, counters, island, and permits under one contract.
SEE THE SERVICE →
Reface the perimeter cabinets to match a new island, without tearing them out.
SEE THE SERVICE →
Island base cabinets built to size, with drawers, seating, or appliance space.
SEE THE SERVICE →
Island tops in quartz, granite, or quartzite, including waterfall edges.
SEE THE SERVICE →
Ask who handles the electrical and plumbing. A cabinet shop can build an island, but outlets, a sink, or a cooktop need licensed trades and a permit.
Ask what the price includes. A low bid often leaves out floor patching, outlets, or slab trenching, then adds them later. Every line below gets priced in your contract up front.
Your project manager answers the phone, schedules the trades, and owns the install dates. You never chase an electrician for an answer about your own island.
Everything in the contract is a line item. Any change gets priced and signed before a crew touches it, so nothing shows up on a final invoice as a surprise.
Dust barriers at the openings, floor protection along the path, and cleanup at the end of each day. Most homeowners stay in the house through the whole job.
Your room’s width decides which island fits. These five layouts cover most Los Angeles kitchens, from galley bungalows to open Valley ranches.
The most common layout. The island sits across from the corner and adds prep and seating. It needs about [42] inches of walkway on the working sides.
Works only in large kitchens, since the island needs clearance on three working sides. It gives the most counter space of any layout.
A single run of cabinets with the island parallel to it. Common in open-plan remodels and condos, where the island holds the sink or cooktop.
An island attached at one end. Peninsulas give you seating in rooms too narrow for a true island, and they don't need a walkway on the fourth side.
An island built mainly for stools, with a deep overhang on one side. Plan about [24] inches of width per stool.
Pick an island that matches or contrasts on purpose. A painted island in a different color reads intentional; a near-match reads like a mistake.
The island in a deeper color than the perimeter, like navy or green under a white kitchen. It gives the room a focal point.
The top runs down both ends to the floor. Waterfalls suit modern and mid-century kitchens and need a mitered joint.
Turned legs, a toe kick, and furniture-like trim. It suits Craftsman and Spanish homes in Highland Park and Los Feliz.
A raised bar ledge hides the prep side from the living room. Two-tier islands suit open-plan kitchens where guests sit.
A wood top on a painted base. Butcher block warms up a white kitchen, and it’s a working surface you can cut on.
Decide what the island is for before you pick a size. A seating island and a cooking island need different depth, power, and venting.
Island type
Best for
Watch out for
Needs
Prep island
Cooks who want counter space
Too deep and you lose walkway
Outlets to code
Seating island
Families and guests
Shallow overhangs hit knees
[12–15] in. overhang
Sink island
Cleanup facing the room
Needs slab trenching in postwar homes
Drain, vent, and a permit
Cooktop island
Cooking while facing guests
Venting is harder than on a wall
Gas or circuit plus venting
Storage island
Small kitchens short on drawers
Adds little seating
Drawers on the working side
Plan about [24] inches per stool and [12–15] inches of knee space. A 7-foot island seats three on one side.
Island outlets follow the California Electrical Code, which sets count and placement. Your electrician plans them with the permit.
A prep sink needs a drain and vent line. On slab foundations, that means cutting and re-pouring the floor.
A cooktop island needs a ceiling hood or a downdraft. Ceiling hoods need duct runs through the ceiling to outside.
The age of your house decides whether an island fits and how hard utilities are to run. Here’s what we usually find, by era.
1920s–30s
Narrow galley kitchens rarely have room for an island. A peninsula or a small rolling cart usually works better, and it keeps original tile and built-ins.
1940s–60s
Slab foundations make island plumbing a trenching job. Outlets are easier, and removing a wall to an old dining room often makes room.
1950s–70s
Open plans and wide rooms suit islands well. Exposed beams limit ceiling hoods, so cooktop islands often use a downdraft instead.
Any era
Raised foundations make plumbing easier than on slabs, but delivering a large stone island top up steep stairs needs a bigger crew.
Any era
HOAs often limit plumbing changes to stack walls, so condo islands usually hold seating and storage rather than a sink.
An island with no power or plumbing is furniture and usually needs no permit. Add outlets, a sink, or a cooktop, and you need an LADBS permit, often with plan check.
New pendant and recessed lights over an island must use JA8-rated, energy-efficient fixtures with proper controls under California’s energy code.
California’s electrical code for islands changed with the 2025 code cycle. Your electrician plans outlet count and placement with the permit.
A sink in the island of a slab-foundation home means cutting the floor, running pipe, and re-pouring. It adds a few days and an inspection.
Cabinet shops build the box; they don’t pull the permit or run the wiring. We design, build, and connect the island under one contract.
CSLB Lic. [#000000]
Measured, not guessed
On our workmanship
No day labor on site
An island runs in six phases. The permit and cabinet build run together, so you’re not waiting on one to start the other.
Phase 01
We measure the room, tape the island outline on your floor, and check every walkway. You approve the size before design goes further.
Phase 02
We finalize cabinets, top, seating, and utilities, then file with LADBS if the island has power or plumbing.
Phase 03
Electricians and plumbers run new lines through the floor. On slab homes this is when trenching happens. A rough inspection closes the phase.
Phase 04
The floor gets patched around the island footprint, so the base sits level and the flooring meets it cleanly.
Phase 05
Island cabinets get set and anchored, then the top is templated off them and installed about [a week] later.
Phase 06
Outlets, sink, cooktop, and pendants get connected and inspected. We walk the island with you and don’t call it done until you do.
One visit tells you if an island fits, what size, and what the utilities involve. You don’t pay for it, and you don’t sign anything.
or send the form and we’ll call you back.
We measure the room, mark clearances, and scope the island. No charge, no obligation.
Form fields: Full name, Email, Phone, Project address, Scope (Kitchen island, Cabinet refacing, New or custom cabinets, Countertop installation, Full kitchen remodel, Not sure yet), Preferred date, Tell us about your kitchen. Submit button: Book My Free Visit (red #E12228).
We build islands from the Valley to the beach cities, including condos and hillside homes. If your neighborhood isn’t listed, call and ask.
Click a question to see the answer. The first one is open to start.
Plan about [42] inches of walkway on every working side, and [48] if two people cook at once. Add the island’s depth, and most kitchens need about 12 to 13 feet of width for a true island.
Most islands run [2–4] feet deep and [4–8] feet long. Size it from the walkways in, not from the photo. A small island with room around it works better than a big one you squeeze past.
Plan about [24] inches of width per stool and [12–15] inches of knee space under the overhang. A 6-foot island seats two comfortably, and an 8-foot island seats three.
Only if it has power or plumbing. An island without outlets, a sink, or a cooktop usually needs no permit. Add any of those, and you need an LADBS permit, which we pull for you.
Usually, yes. A sink needs a drain and vent line, which means cutting the slab in most postwar LA homes. Raised-foundation homes are easier. Decide before the cabinets are ordered.
Yes, with venting. A cooktop island needs a ceiling hood ducted outside or a downdraft vent, plus a gas line or dedicated circuit. We plan the venting first, since it limits where the cooktop can go.
Choose an island if you have clearance on every working side. Choose a peninsula if the room is too narrow. A peninsula gives you similar seating and prep space with one less walkway.
It can match or contrast, but pick one on purpose. A contrasting color reads intentional. A near-match that’s slightly off reads like a mistake, so we bring finish samples for both.
We stop, photograph it, and price the repair as a written change order before touching it. Patching the floor around the island base is part of every estimate.
Design, cabinets, top, seating supports, outlets, plumbing, venting, floor patching, permit, and install, listed line by line. If an item isn’t on the estimate, it isn’t in the price.
Full gut baths, wet-room showers, and waterproofing done to code.
Detached ADUs, garage conversions, and room additions from plans to permit.
Every room on one schedule, one permit set, and one crew.
BOOKING STARTS FOR [MONTH] AND [MONTH]
The right island adds seating and prep space without blocking your kitchen. Los Angeles Home Remodelers designs, builds, and connects it under one contract. Book your free clearance check today.
Mon–Sat, 8am–6pm
We measure the room, mark clearances, and scope the island. No charge, no obligation.
Form fields: Full name, Email, Phone, Project address, Scope (Kitchen island, Cabinet refacing, New or custom cabinets, Countertop installation, Full kitchen remodel, Not sure yet), Preferred date, Tell us about your kitchen. Submit button: Book My Free Visit (red #E12228).